51单片机ds1302程序

1. 51单片机控制DS1302，时间显示在数码管上。

1302.c

#include<DS1302.h>

#include<key.h>

ucharbit_ser[]={0xfe,0xfd,0xfb,0xf7,0xef,0xdf};

ucharseven_seg[]={0xc0,0xf9,0xa4,0xb0,0x99,0x92,0x82,0xf8,0x80,0x90};

/***********************时间显示*****************/

voidtimer0_init(void) //T0初始化函数，用于时间的动态显示

{

TMOD=0x21;

TL0=(65536-5000)%256;

TH0=(65536-5000)/256;

EA=1;

ET0=1;

TR0=1;

}

voidtimer0_isr(void)interrupt1 //T0中断处理函数

{

charflag; //flag用于表示调整时闪烁的亮或灭

TR0=0;

TL0=(65536-5000)%256;

TH0=(65536-5000)/256;

TR0=1;

flag=x/100*0xff; //设置闪烁标志，如果x大于100则flag为0xff，小于100则为0x00

x++;

if(x>200)

x=0;

switch(i)

{

case0:

P2=bit_ser[0];

if(setflag==3) //根据setflag的值判断当前位是否需要闪烁

P0=flag|seven_seg[dis_buffer[0]];

else

P0=seven_seg[dis_buffer[0]];

break;

case1:

P2=bit_ser[1];

if(setflag==3)

P0=flag|seven_seg[dis_buffer[1]];

else

P0=seven_seg[dis_buffer[1]];

break;

case2:

P2=bit_ser[2];

if(setflag==2)

P0=flag|seven_seg[dis_buffer[2]];

else

P0=seven_seg[dis_buffer[2]];

break;

case3:

P2=bit_ser[3];

if(setflag==2)

P0=flag|seven_seg[dis_buffer[3]];

else

P0=seven_seg[dis_buffer[3]];

break;

case4:

P2=bit_ser[4];

if(setflag==1)

P0=flag|seven_seg[dis_buffer[4]];

else

P0=seven_seg[dis_buffer[4]];

break;

case5:

P2=bit_ser[5];

if(setflag==1)

P0=flag|seven_seg[dis_buffer[5]];

else

P0=seven_seg[dis_buffer[5]];

break;

}

i++;

if(i>=6)

{

i=0;

if(j==10)

{

j=0;

if(setflag==0)

DS1302_GetTime(&Time); //如果setflag是0，就从1302中读出时间,因为setflag不是0时，说明处于调整状态，不需要读时间

dis_buffer[5]=Time.Second%10; //把当前时间放入显示缓冲区

dis_buffer[4]=Time.Second/10;

dis_buffer[3]=Time.Minute%10;

dis_buffer[2]=Time.Minute/10;

dis_buffer[1]=Time.Hour%10;

dis_buffer[0]=Time.Hour/10;

}

j++;

}

}

voidmain()

{

Initial_DS1302(Time);

timer0_init();

while(1)

{

set_down();

timer_down();

up_down();

down_down();

beepflag_down();

if(setflag==0&&Time.Hour==romhour&&Time.Minute==romminute&&Beepflag==1) //判断蜂鸣器是否要响

Beep=!Beep;

}

}

//key.c

#include<reg51.h>

#defineucharunsignedchar

#defineuintunsignedint

uchari=0,j=0,x=0,setflag,flag_set,flag_timer;//setflag用来表示调整的位置，flag_set和flag_timer分别表示当前处于调整状态还是定时状态

SYSTEMTIMETime={0,20,15,3,30,6,10}; //系统时间的初始值2010年6月30日星期三，15时20分0秒

chardis_buffer[6]; //存放显示数据的缓冲区

sbitBeep_flag=P3^2; //蜂鸣器的接口

sbitkey_timer=P3^4; //定时按钮

sbitkey_set=P3^5; //调整按钮

sbitkey_up=P3^6; //增加按钮

sbitkey_down=P3^7; //减小按钮

charromhour,romminute,romsec; //分别存放定时的时，分，秒

bitBeepflag; //标记闹钟是否开启

//延时函数

voiddelays(ucharx)

{

while(x)x--;

}

//设置键的处理函数

voidset()

{

setflag++;

flag_set=1;

if(setflag>=4)

{

setflag=0;

flag_set=0;

Initial_DS1302(Time);

}

}

//定时间的处理函数

voidtimer()

{

setflag++;

flag_timer=1;

if(setflag==1)

{

Time.Hour=romhour;

Time.Minute=romminute;

Time.Second=romsec;

}

elseif(setflag>=4)

{

setflag=0;

flag_timer=0;

romhour=Time.Hour;

romminute=Time.Minute;

romsec=Time.Second;

}

}

//增加键的处理函数

voip()

{

switch(setflag)

{

case0:

break;

case1:

Time.Second++;

if(Time.Second>=60)

Time.Second=0;

break;

case2:

Time.Minute++;

if(Time.Minute>=60)

Time.Minute=0;

break;

case3:

Time.Hour++;

if(Time.Hour>=24)

Time.Hour=0;

break;

}

}

//减小键的处理函数

voiddown()

{

switch(setflag)

{

case0:

break;

case1:

Time.Second--;

if(Time.Second<0)

Time.Second=59;

break;

case2:

Time.Minute--;

if(Time.Minute<0)

Time.Minute=59;

break;

case3:

Time.Hour--;

if(Time.Hour<0)

Time.Hour=23;

break;

}

}

//设置键的扫描函数

voidset_down()

{

if(key_set==0&&flag_timer==0)

{

delays(100);

if(key_set==0)

{

set();

}

while(!key_set);

}

}

//定时键的扫描函数

voidtimer_down()

{

if(key_timer==0&&flag_set==0)

{

delays(100);

if(key_timer==0)

{

timer();

}

while(!key_timer);

}

}

//增加键的扫描函数

voip_down()

{

if(key_up==0&&setflag!=0)

{

delays(100);

if(key_up==0)

{

up();

while(!key_up);

}

}

}

//减少键的处理函数

voiddown_down()

{

if(key_down==0&&setflag!=0)

{

delays(100);

if(key_down==0)

{

down();

while(!key_down);

}

}

}

//定时开关的扫描处理函数

voidbeepflag_down()

{

if(Beep_flag==0)

{

delays(100);

{

Beepflag=!Beepflag;

while(!Beep_flag);

}

}

}

//ds1302.h

#ifndef_REAL_TIMER_DS1302

#define_REAL_TIMER_DS1302

#include<REG51.h>

sbitDS1302_CLK=P1^1;//实时时钟时钟线引脚

sbitDS1302_IO=P1^2;//实时时钟数据线引脚

sbitDS1302_RST=P1^3;//实时时钟复位线引脚

sbitACC0=ACC^0;

sbitACC7=ACC^7;

sbitBeep=P2^7;

typedefstruct__SYSTEMTIME__

{ charSecond;

charMinute;

charHour;

charWeek;

charDay;

charMonth;

charYear;

}SYSTEMTIME; //定义的时间类型

#defineAM(X) X

#definePM(X) (X+12) //转成24小时制

#defineDS1302_SECOND 0x80//秒寄存器

#defineDS1302_MINUTE 0x82//分寄存器

#defineDS1302_HOUR 0x84

#defineDS1302_WEEK 0x8A

#defineDS1302_DAY 0x86

#defineDS1302_MONTH 0x88

#defineDS1302_YEAR 0x8C

#defineDS1302_RAM(X) (0xC0+(X)*2) //用于计算DS1302_RAM地址的宏

voidDS1302InputByte(unsignedchard) //实时时钟写入一字节(内部函数)

{unsignedchari;

ACC=d;

for(i=8;i>0;i--)

{ DS1302_IO=ACC0; //相当于汇编中的RRC

DS1302_CLK=1;

DS1302_CLK=0;//发一个高跳变到低的脉冲

ACC=ACC>>1;

}

}

unsignedcharDS1302OutputByte(void) //实时时钟读取一字节(内部函数)

{ unsignedchari;

for(i=8;i>0;i--)

{ ACC=ACC>>1; //相当于汇编中的RRC

ACC7=DS1302_IO;

DS1302_CLK=1;

DS1302_CLK=0;//发一个高跳变到低的脉冲

}

return(ACC);

}

voidWrite1302(unsignedcharucAddr,unsignedcharucDa)//ucAddr:DS1302地址,ucData:要写的数据

{ DS1302_RST=0;

DS1302_CLK=0;

DS1302_RST=1;

DS1302InputByte(ucAddr); //地址，命令

DS1302InputByte(ucDa); //写1Byte数据

DS1302_CLK=1;

DS1302_RST=0;//RST0->1->0,CLK0->1

}

unsignedcharRead1302(unsignedcharucAddr) //读取DS1302某地址的数据

{ unsignedcharucData;

DS1302_RST=0;

DS1302_CLK=0;

DS1302_RST=1;//enable

DS1302InputByte(ucAddr|0x01);//地址，命令

ucData=DS1302OutputByte();//读1Byte数据

DS1302_CLK=1;//RST0->1->0,CLK0->1

DS1302_RST=0;

return(ucData);

}

voidDS1302_SetProtect(bitflag)//是否写保护

{ if(flag)

Write1302(0x8E,0x80);//WP=1,不能写入

else

Write1302(0x8E,0x00);//WP=0,可以写入

}

voidDS1302_SetTime(unsignedcharAddress,unsignedcharValue)//设置时间函数

{ DS1302_SetProtect(0);

Write1302(Address,((Value/10)<<4|(Value%10)));//高4位为十位，低4位为个位

DS1302_SetProtect(1);

}

//获取时间函数，从DS1302内读取时间然后存入Time内

voidDS1302_GetTime(SYSTEMTIME*Time)

{ unsignedcharReadValue;

ReadValue=Read1302(DS1302_SECOND);

Time->Second=((ReadValue&0x70)>>4)*10+(ReadValue&0x0F);//转换成10进制的秒

ReadValue=Read1302(DS1302_MINUTE);

Time->Minute=((ReadValue&0x70)>>4)*10+(ReadValue&0x0F);

ReadValue=Read1302(DS1302_HOUR);

Time->Hour=((ReadValue&0x70)>>4)*10+(ReadValue&0x0F);

ReadValue=Read1302(DS1302_DAY);

Time->Day=((ReadValue&0x70)>>4)*10+(ReadValue&0x0F);

ReadValue=Read1302(DS1302_WEEK);

Time->Week=((ReadValue&0x70)>>4)*10+(ReadValue&0x0F);

ReadValue=Read1302(DS1302_MONTH);

Time->Month=((ReadValue&0x70)>>4)*10+(ReadValue&0x0F);

ReadValue=Read1302(DS1302_YEAR);

Time->Year=((ReadValue&0x70)>>4)*10+(ReadValue&0x0F);

}

//利用STime初始化DS1302

voidInitial_DS1302(SYSTEMTIMESTime)

{ unsignedcharSecond=Read1302(DS1302_SECOND);

if(Second&0x80) DS1302_SetTime(DS1302_SECOND,0);//如果第七为1（表明没有启动),则启动时钟

DS1302_SetTime(DS1302_SECOND,STime.Second); //设定起始时间

DS1302_SetTime(DS1302_MINUTE,STime.Minute);

DS1302_SetTime(DS1302_HOUR,STime.Hour);

DS1302_SetTime(DS1302_DAY,STime.Day);

DS1302_SetTime(DS1302_MONTH,STime.Month);

DS1302_SetTime(DS1302_YEAR,STime.Year);

DS1302_SetTime(DS1302_WEEK,STime.Week);

}

#endif

2. 跪求 51单片机+12864液晶+1302时钟制成的万年历c程序

顶层文件 万年历.C
#include<reg51.h>
#include "LCD1602.h"
#include "DS1302.h"
#define uchar unsigned char
#define uint unsigned int
sbit speaker=P2^4;
bit key_flag1=0,key_flag2=0;
SYSTEMTIME adjusted;
uchar sec_add=0,min_add=0,hou_add=0,day_add=0,mon_add=0,yea_add=0;
uchar data_alarm[7]={0};
/************键盘控制******************************/
int key_scan() //扫描是否有键按下
{ int i=0;
uint temp;
P1=0xf0;
temp=P1;
if(temp!=0xf0)
i=1;
else
i=0;
return i;
}
uchar key_value() //确定按键的值
{
uint m=0,n=0,temp;
uchar value;
uchar v[4][3]={'2','1','0','5','4','3','8','7','6','b','a','9'} ;
P1=0xfe; temp=P1; if(temp!=0xfe)m=0;
P1=0xfd;temp=P1 ;if(temp!=0xfd)m=1;
P1=0xfb;temp=P1 ;if(temp!=0xfb)m=2;
P1=0xf7;temp=P1 ;if(temp!=0xf7)m=3;
P1=0xef;temp=P1 ;if(temp!=0xef)n=0;
P1=0xdf;temp=P1 ;if(temp!=0xdf)n=1;
P1=0xbf;temp=P1 ;if(temp!=0xbf)n=2;
value=v[m][n];
return value;
}
/***************************设置闹铃函数*******************************/
void naoling(void)
{
uchar i=0,l=0,j;
init1602();
while(key_flag2&&i<12)
if(key_scan()){j=key_value();write_data(j);if(i%2==0)data_alarm[l]=(j-'0')*10;else {data_alarm[l]+=(j-'0');l++;}i++;delay(600);}
write_com(0x01);
}
uchar according(void)
{ uchar k;
if(data_alarm[0]==adjusted.Year&&data_alarm[1]==adjusted.Month&&data_alarm[2]==adjusted.Day&&data_alarm[3]==adjusted.Hour&&data_alarm[4]==adjusted.Minute&&data_alarm[5]==adjusted.Second)
k=1;
else k=0;
return k;
}
void speak(void)
{uint i=50;
while(i)
{speaker=0;
delay(1);
speaker=1;
delay(1);
i--;
}
}
void alarm(void)
{uint i=10;
while(i)
{
speak();
delay(10);
i--;
}
}
/**************************修改时间操作********************************/
void reset(void)
{
sec_add=0;
min_add=0;
hou_add=0;
day_add=0;
mon_add=0;
yea_add=0 ;
}
void adjust(void)
{

if(key_scan()&&key_flag1)
switch(key_value())
{case '0':sec_add++;break;
case '1':min_add++;break;
case '2':hou_add++;break;
case '3':day_add++;break;
case '4':mon_add++;break;
case '5':yea_add++;break;
case 'b':reset();break;
default: break;
}
adjusted.Second+=sec_add;
adjusted.Minute+=min_add;
adjusted.Hour+=hou_add;
adjusted.Day+=day_add;
adjusted.Month+=mon_add;
adjusted.Year+=yea_add;
if(adjusted.Second>59) adjusted.Second=adjusted.Second%60;

if(adjusted.Minute>59) adjusted.Minute=adjusted.Minute%60;

if(adjusted.Hour>23) adjusted.Hour=adjusted.Hour%24;

if(adjusted.Day>31) adjusted.Day=adjusted.Day%31;

if(adjusted.Month>12) adjusted.Month=adjusted.Month%12;

if(adjusted.Year>100) adjusted.Year=adjusted.Year%100;

}

/**************************中断处理函数*********************************/
void changing(void) interrupt 0 using 0 //需要修改时间和日期，或者停止修改
{
if(key_flag1)key_flag1=0;
else key_flag1=1;
}
void alarming(void) interrupt 3 using 0 //需要设置闹铃或者停止设置
{
if(key_flag2)key_flag2=0;
else key_flag2=1;
}
/********************************主函数***********************************/
main()
{uint i;
uchar *l;
uchar p1[]="D:",p2[]="T:";
SYSTEMTIME T;
EA=1;
EX0=1;
IT0=1;
EA=1;
EX1=1;
IT1=1;
init1602();
Initial_DS1302() ;

while(1)
{ write_com(0x80);
write_string(p1,2);
write_com(0xc0);
write_string(p2,2);
DS1302_GetTime(&T) ;
adjusted.Second=T.Second;
adjusted.Minute=T.Minute;
adjusted.Hour=T.Hour;
adjusted.Week=T.Week;
adjusted.Day=T.Day;
adjusted.Month=T.Month;
adjusted.Year=T.Year;
for(i=0;i<9;i++)
{
adjusted.DateString[i]=T.DateString[i];
adjusted.TimeString[i]=T.TimeString[i];
}
adjust();
if(key_flag2)naoling();
if(according())alarm();
DateToStr(&adjusted);
TimeToStr(&adjusted);
write_com(0x82);
write_string(adjusted.DateString,8);
write_com(0xc2);
write_string(adjusted.TimeString,8);
delay(10);
}
（二）头文件1 显示模块 LCD1602.H
#ifndef LCD_CHAR_1602_2009_5_9
#define LCD_CHAR_1602_2009_5_9
#define uchar unsigned char
#define uint unsigned int
sbit lcdrs = P2^0;
sbit lcdrw = P2^1;
sbit lcden = P2^2;
void delay(uint z) // 延时
{
uint x,y;
for(x=z;x>0;x--)
for(y=110;y>0;y--);
}
void write_com(uchar com) // 写入指令数据到 lcd
{
lcdrw=0;
lcdrs=0;
P0=com;
delay(5);
lcden=1;
delay(5);
lcden=0;
}

void write_data(uchar date) // 写入字符显示数据到 lcd
{
lcdrw=0;
lcdrs=1;
P0=date;
delay(5);
lcden=1;
delay(5);
lcden=0;
}
void init1602() // 初始化设定
{
lcdrw=0;
lcden=0;
write_com(0x3C);
write_com(0x0c);
write_com(0x06);
write_com(0x01);
write_com(0x80);
}
void write_string(uchar *pp,uint n)
{
int i;
for(i=0;i<n;i++)
write_data(pp[i]);
}
#endif
(三)头文件2 时钟模块 DS1302.H
#ifndef _REAL_TIMER_DS1302_2009_5_20_
#define _REAL_TIMER_DS1302_2003_5_20_

sbit DS1302_CLK = P2^6; //实时时钟时钟线引脚
sbit DS1302_IO = P2^7; //实时时钟数据线引脚
sbit DS1302_RST = P2^5; //实时时钟复位线引脚
sbit ACC0 = ACC^0;
sbit ACC7 = ACC^7;

typedef struct SYSTEM_TIME
{
unsigned char Second;
unsigned char Minute;
unsigned char Hour;
unsigned char Week;
unsigned char Day;
unsigned char Month;
unsigned char Year;
unsigned char DateString[9]; //用这两个字符串来放置读取的时间
unsigned char TimeString[9];
}SYSTEMTIME; //定义的时间类型

#define AM(X) X
#define PM(X) (X+12) // 转成24小时制
#define DS1302_SECOND 0x80
#define DS1302_MINUTE 0x82
#define DS1302_HOUR 0x84
#define DS1302_WEEK 0x8A
#define DS1302_DAY 0x86
#define DS1302_MONTH 0x88
#define DS1302_YEAR 0x8C
#define DS1302_RAM(X) (0xC0+(X)*2) //用于计算 DS1302_RAM 地址的宏

/******内部指令**********/
void DS1302InputByte(unsigned char d) //实时时钟写入一字节(内部函数)
{
unsigned char i;
ACC = d;
for(i=8; i>0; i--)
{
DS1302_IO = ACC0;
DS1302_CLK = 1;
DS1302_CLK = 0;
ACC = ACC >> 1; //因为在前面已经定义了ACC0 = ACC^0;以便再次利用DS1302_IO = ACC0;
}
}

unsigned char DS1302OutputByte(void) //实时时钟读取一字节(内部函数)
{
unsigned char i;
for(i=8; i>0; i--)
{
ACC = ACC >>1;
ACC7 = DS1302_IO;
DS1302_CLK = 1;
DS1302_CLK = 0;
}
return(ACC);
}
/********************************/

void Write1302(unsigned char ucAddr, unsigned char ucDa) //ucAddr: DS1302地址, ucData: 要写的数据
{
DS1302_RST = 0;
DS1302_CLK = 0;
DS1302_RST = 1;
DS1302InputByte(ucAddr); // 地址，命令
DS1302InputByte(ucDa); // 写1Byte数据
DS1302_CLK = 1;
DS1302_RST = 0;
}

unsigned char Read1302(unsigned char ucAddr) //读取DS1302某地址的数据
{
unsigned char ucData;
DS1302_RST = 0;
DS1302_CLK = 0;
DS1302_RST = 1;
DS1302InputByte(ucAddr|0x01); // 地址，命令
ucData = DS1302OutputByte(); // 读1Byte数据
DS1302_CLK = 1;
DS1302_RST = 0;
return(ucData);
}

void DS1302_SetProtect(bit flag) //是否写保护
{
if(flag)
Write1302(0x8E,0x10);
else
Write1302(0x8E,0x00);
}

void DS1302_SetTime(unsigned char Address, unsigned char Value) // 设置时间函数
{
DS1302_SetProtect(0);
Write1302(Address, ((Value/10)<<4 | (Value%10))); //将十进制数转换为BCD码
} //在DS1302中的与日历、时钟相关的寄存器存放的数据必须为BCD码形式

void DS1302_GetTime(SYSTEMTIME *Time)
{
unsigned char ReadValue;
ReadValue = Read1302(DS1302_SECOND);
Time->Second = ((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F); //将BCD码转换为十进制数
ReadValue = Read1302(DS1302_MINUTE);
Time->Minute = ((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F);
ReadValue = Read1302(DS1302_HOUR);
Time->Hour = ((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F);
ReadValue = Read1302(DS1302_DAY);
Time->Day = ((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F);
ReadValue = Read1302(DS1302_WEEK);
Time->Week = ((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F);
ReadValue = Read1302(DS1302_MONTH);
Time->Month = ((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F);
ReadValue = Read1302(DS1302_YEAR);
Time->Year = ((ReadValue&0x70)>>4)*10 + (ReadValue&0x0F);
}
unsigned char *DataToBCD(SYSTEMTIME *Time)
{
unsigned char D[8];
D[0]=Time->Second/10<<4+Time->Second%10;
D[1]=Time->Minute/10<<4+Time->Minute%10;
D[2]=Time->Hour/10<<4+Time->Hour%10;
D[3]=Time->Day/10<<4+Time->Day%10;
D[4]=Time->Month/10<<4+Time->Month%10;
D[5]=Time->Week/10<<4+Time->Week%10;
D[6]=Time->Year/10<<4+Time->Year%10;
return D;
}
void DateToStr(SYSTEMTIME *Time)
{
//将十进制数转换为液晶显示的ASCII值
Time->DateString[0] = Time->Year/10 + '0';
Time->DateString[1] = Time->Year%10 + '0';
Time->DateString[2] = '-';
Time->DateString[3] = Time->Month/10 + '0';
Time->DateString[4] = Time->Month%10 + '0';
Time->DateString[5] = '-';
Time->DateString[6] = Time->Day/10 + '0';
Time->DateString[7] = Time->Day%10 + '0';
Time->DateString[8] = '\0';
}

void TimeToStr(SYSTEMTIME *Time)
{
//将十进制数转换为液晶显示的ASCII值
Time->TimeString[0] = Time->Hour/10 + '0';
Time->TimeString[1] = Time->Hour%10 + '0';
Time->TimeString[2] = ':';
Time->TimeString[3] = Time->Minute/10 + '0';
Time->TimeString[4] = Time->Minute%10 + '0';
Time->TimeString[5] = ':';
Time->TimeString[6] = Time->Second/10 + '0';
Time->TimeString[7] = Time->Second%10 + '0';
Time->DateString[8] = '\0';
}
void Initial_DS1302(void)
{
unsigned char Second;
Second=Read1302(DS1302_SECOND);
if(Second&0x80) //初始化时间
DS1302_SetTime(DS1302_SECOND,0);
}
void DS1302_TimeStop(bit flag) // 是否将时钟停止
{
unsigned char Data;
Data=Read1302(DS1302_SECOND);
DS1302_SetProtect(0);
if(flag)
Write1302(DS1302_SECOND, Data|0x80);
else
Write1302(DS1302_SECOND, Data&0x7F);
}
#endif

3. 基于单片机51系列及DS1302时钟芯片数字电子钟的制作。求电路总原理图、PCB图、程序以及元件清单。

元件基本差不多。电路如图

#include<intrins.h>

#defineucharunsignedchar

#defineuintunsignedint

sbitds1302_RST=P2^0;

sbitds1302_IO =P2^1;

sbitds1302_SCLK=P2^2;

sbitACC0=ACC^0;

sbitACC7=ACC^7;

sbitA1=P3^0;

sbitA2=P3^1;

sbitA3=P3^2;

sbitA4=P3^3;

sbitA5=P3^4;

sbitA6=P3^5;

sbitkey1=P3^6;

sbitkey2=P3^7;

ucharnow_time[3],wei,d[3]={0,0,0};

ucharcodes[]={0xc0,0xf9,0xa4,0xb0,0x99,0x92,0x82,0xf8,0x80,0x90,0x88,0x83,0xc6,0xa1,0x86,0x8e

};

voiddelay(uintx)

{

uchari;

for(x;x>0;x--)

for(i=0;i<100;i++);

}

voiddisp()

{

P1=s[now_time[2]/16];

A1=d[2];

delay(5);

A1=1;

P1=s[now_time[2]%16];

A2=d[2];

delay(5);

A2=1;

P1=s[now_time[1]/16];

A3=d[1];

delay(5);

A3=1;

P1=s[now_time[1]%16];

A4=d[1];

delay(5);

A4=1;

P1=s[now_time[0]/16];

A5=d[0];

delay(5);

A5=1;

P1=s[now_time[0]%16];

A6=d[0];

delay(5);

A6=1;

}

/***********************************************************************/

uchar read_Byte()

{

uchari;

for(i=8;i>0;i--)

{

ACC=ACC>>1;

ACC7=ds1302_IO;

ds1302_SCLK=1;

ds1302_SCLK=0;

}

return(ACC);

}

void write_Byte(uchartdata)

{

uchari;

ACC=tdata;

for(i=8;i>0;i--)

{

ds1302_IO=ACC0;

ds1302_SCLK=1;

ds1302_SCLK=0;

ACC=ACC>>1;

}

}

/***********************************************************************************/

voidwrite_data_ds1302(uchartaddr,uchartdata)

{

ds1302_RST=0;

ds1302_SCLK=0;

ds1302_RST=1;

write_Byte(taddr);

write_Byte(tdata);

ds1302_RST=0;

ds1302_SCLK=1;

}

ucharread_data_ds1302(uchartaddr)

{

uchartdata;

ds1302_RST=0;

ds1302_SCLK=0;

ds1302_RST=1;

write_Byte(taddr);

tdata=read_Byte();

ds1302_RST=0;

ds1302_SCLK=1;

return(tdata);

}

/***********************************************************************************/

voidget_ds1302()

{

uchark;

uchartaddr=0x81;

for(k=0;k<3;k++)

{

now_time[k]=read_data_ds1302(taddr);

taddr+=2;

}

}

/***********************************************************************************/

voidinit_ds1302()

{

ds1302_RST=0;

ds1302_SCLK=0;

A1=1;

A2=1;

A3=1;

A4=1;

A5=1;

A6=1;

write_data_ds1302(0x80,0x00);

}

/***********************************************************************************/

void Time();

/***********************************************************************************/

main()

{

init_ds1302();

while(1)

{

disp();

get_ds1302();

if(key1==0);

{delay(10);

if(key1==0)

Time();

}

}

}

voidtimer()interrupt3

{

uchari;i++;

TH1=(65535-50000)/256;

TL2=(65535-50000)%256;

if(i==50)

{

d[wei]=1;

}

if(i==100)

{i=0;

d[wei]=0;

}

}

/***********************************************************************************/

void Time()

{

uchartemp;

uintr=0,p=1;

wei=2;

TMOD=0x01;

EA=1;

ET1=1;

TH1=(65535-50000)/256;

TL2=(65535-50000)%256;

TR1=1;

for(r=0;r<50;r++)

disp();

while(key1)

{

wei=2;

disp();

if(key2==0)

{

disp();

if(key2==0)

{

temp=now_time[2]/16*10+now_time[2]%16;

temp++;

if(temp>=24)

temp=0;

now_time[2]=temp/10*16+temp%10;

write_data_ds1302(0x84,now_time[2]);

}

while(!key2);

}

}

wei=1;

d[2]=0;

for(r=0;r<50;r++)

disp();

while(key1)

{disp();

if(key2==0)

{

disp();

if(key2==0)

{

temp=now_time[1]/16*10+now_time[1]%16;

temp++;

if(temp>=60)

temp=0;

now_time[1]=temp/10*16+temp%10;

write_data_ds1302(0x82,now_time[1]);

}

while(!key2);

}

}

wei=0;

d[1]=0;

for(r=0;r<50;r++)

disp();

while(key1)

{

disp();

if(key2==0)

{

now_time[0]=0;

write_data_ds1302(0x80,now_time[0]);

}

} TR1=0;

d[0]=0;

for(r=0;r<30;r++)

disp();

}

按图安装即可，祝你成功。

4. 51单片机 制作 日历时钟 用汇编语言 要详细的代码和硬件图示

这给图能帮助你，不用太感激我，我很低调的。